Showing posts with label popcorn maker. Show all posts
Showing posts with label popcorn maker. Show all posts

7/12/2012

West Bend Aluminum Stove-Top Popper Review

West Bend Aluminum Stove-Top Popper
Average Reviews:

(More customer reviews)
My family loves homemade popcorn, and I've never been a fan of microwave or air popped popcorn. Last year I received this popper as a gift.
Pros: Easy to clean
Heats up fast
Cons: Where do I start?
You may notice from the picture that there is a rod that fits into a hole at the top of the popper. The rod is too short, and the lid easily comes off, even when it is clipped on the other side. This means a few different things
a) the lid doesn't stay on well while popping.
b) When carrying the popper by the handle, the lid disengages from the popper. If it's full of popcorn, you have hot popcorn all over the floor.
The lid that opens doesn't stay on right. It seems as if the lid is also ill-fitted for the pot. The lid doesn't stay up when you try to put in oil and popcorn, so you have to juggle this step with two hands. Also, as you're turning the handle or adjusting the popper on the burner, the half lid falls down, and so popcorn starts popping out. Try turning the handle and putting the half lid back up while not getting burnt. It's not easy, and I've often ended up with burnt popcorn when this happens.

Click Here to see more reviews about: West Bend Aluminum Stove-Top Popper



Buy NowGet 7% OFF

Click here for more information about West Bend Aluminum Stove-Top Popper

Read More...

6/27/2012

Presto Orville Redenbacher's Stirring Popper Review

Presto Orville Redenbacher's Stirring Popper
Average Reviews:

(More customer reviews)
Let me preface this with I bought this popper as a replacement to my West Bend Stir Crazy popper that I had used with great frequency for 16 years (got it as a wedding gift) until the heat element decided it had popped it's last popcorn. This remarkable durability set the bar high for its replacement. I was unable to find a West Bend replacement at the time locally but I had found this Presto model. This popper had no realistic hope of reaching the bar set by the previous popper, but even with reduced expectations I'm disappointed. This popper comes in two parts and I have different feelings for each;
I'll start with the positive first:
The base is solid and the motor is quiet. The non-stick coating is great, clean up is fantastic as you only need take a paper towel to wipe it out and done! I've not had any problem with popping issues outside of having purchased a brand of substandard popcorn that I will never buy again. That's not the poppers fault, that's me trying to save a buck. The base by itself deserves 4 stars.
Now for the negative and the main reason behind my two star rating:
The clear bowl is complete rubbish. After the third use, I could see a hair line crack that was forming from one of the drip holes in the "butter tray" going towards the center. I never put butter in there anyway so I didn't give it much consideration given its location. The next use, while washing I noticed additional cracks had formed both in the butter tray as well as around the side handle area and one in the middle of the bowl's side. With each use, they've gotten worse.
To be clear, I've always hand washed the bowl and not in the dishwasher per the instructions and given the duration of my previous popper I don't think it's something I'm doing to cause this to occur as I'm not doing anything different. I can only guess its heat related as for the life of me I can't figure out how else these could be forming.
My wife has made fun of me as I've been duct taping the outside of the bowl where cracks have come together to try to maintain some sort of structural integrity of the bowl so I can keep on popping and get as many uses out of it as possible, but as a whole the bowl is deteriorating rapidly. This last batch I just made may be the last one as yet another crack that was not there prior to use has spawned from the side handle down the bowl and almost to the butter tray.
It's a shame as the base appears to be solidly made and usable for a long time.
As fortune would have it, I got a new West Bend Stir Crazy as a Christmas gift. I wonder if it will last 16 years like its predecessor? Not likely, as with everything it seems these days, they don't make them like they used to. But I would expect it to last at least one year, not 3 months.

Click Here to see more reviews about: Presto Orville Redenbacher's Stirring Popper



Buy NowGet 26% OFF

Click here for more information about Presto Orville Redenbacher's Stirring Popper

Read More...

6/16/2012

West Bend Microwave Popcorn Popper Review

West Bend Microwave Popcorn Popper
Average Reviews:

(More customer reviews)
Saw this popper on America's Test Kitchen. It looked promising. Found it available on Amazon & ordered. What a bargain! It is simple to use. Just measure 1/4 to 1/3 cup of popcorn into popper, put in microwave & set on high from 3 to 5 minutes. No mess or fuss! Popcorn can be flavored with any spice or condiment you like. Clean up by wiping with a paper towel. I'm thinking of buying this popper for Christmas presents!

Click Here to see more reviews about: West Bend Microwave Popcorn Popper



Buy NowGet 10% OFF

Click here for more information about West Bend Microwave Popcorn Popper

Read More...

3/29/2012

West Bend 82386 Kettle Krazy Popcorn Popper and Nut Roaster Review

West Bend 82386 Kettle Krazy Popcorn Popper and Nut Roaster
Average Reviews:

(More customer reviews)
I shopped around quite a bit for a popcorn popper. I was tired of microwave stuff, and don't like the results from a hot-air popper.
There are several like this, with a motorized stirring rod and a cooking surface, but either they get poor reviews for reliability (Cuisinart), or were too expensive, difficult to maintain, scratched the Teflon cooking surface, etc.
This model is very similar to the West Bend Stir Crazy, but has two heat settings (nuts or popcorn) and - most importantly - a much thicker stirring rod. With the more basic Stir Crazy, the rod is thin and easily flexed (think coat-hanger) and diverted by the weight of the popcorn itself, causing it to be pressed into the Teflon surface while rotating, thus scratching the Teflon. This model has a MUCH thicker stirring rod (I took a few pictures and added them above to demonstrate) that never makes contact with the surface.
The popper pretty much performs like it's supposed to. I was curious to see if the lid stayed in place while popping a full batch, because is simply sits on top and is only held in place by the weight of the cover. It does in deed stay put.
It doesn't seem to matter what brand of popping corn you use. Name brand or generic seem to perform the same - very well. I have never used the butter well, because I don't like how you wind up with a few soggy bits of corn rather than all of it having a consistent flavor and texture. I've experimented some and found that simply adding several pats of butter to the oil and corn does a great job of giving you a nice mild butter flavor. I thought maybe the butter would burn, but that did not happen. I also reduced the oil by 1/2T Spoon, but don't recommend reducing the oil much more than that, since the distributed hot oil is what promotes the rapid kernel popping. I also added salt directly to the oil and popping corn at the beginning of the process, which worked well enough, but was more difficult to clean in the end. I'm also worried that it might over time scratch the Teflon surface, so I don't plan to do that again.
The bowl is moderate thickness, and appears fairly sturdy. It is not flexible, so I imagine a hard drop might crack it. Because it is a hard clear plastic, it is susceptible to scratching if you use any kind of abrasive to clean it. I'm not sure why you would, considering it only takes a bit of soap and hot water to clean popcorn/oil/butter residue, but whatever.
Finally, it comes with a few recipes in the manual. We've tried a couple and they turned out well. One of them was Scotcheroo Popcorn - which is a sort of gooey sweet treat that includes chocolate and butterscotch chips.
All together we are really, really happy with this popper. I recommend it without hesitation.
UPDATE: UPDADE: I often wonder about these reviews. 99% of the good reviews are written in the first few days of ownership. This tell you nothing of the longevity of the product. So, I am back after a year to tell you that I still love this popper. It still does a great job, and has had absolutely no issues.

Click Here to see more reviews about: West Bend 82386 Kettle Krazy Popcorn Popper and Nut Roaster

Ideal for anyone who loves to curl up with a bowl of popcorn and watch movies, this electric popper quickly pops up to 6-quarts of fresh, hot popcorn in minutes. The versatile appliance can also be used to make up to 3 cups of mall-kiosk-style glazed nuts or roasted nuts to serve to friends on poker night or when watching the big game. Simply turn the control knob from "off" to "popcorn" or "nuts", depending on the task at hand. The unit's motorized stir rod and nonstick temperature-controlled heating plate work together to keep the kernels or nuts in constant motion and evenly heated for thoroughly roasted nuts or perfectly popped popcorn (with very few unpopped kernels). Even more, the machine's see-through lid doubles as a 6-quart (24-cup) popcorn bowl. Simply pop, flip, and serve. Extended stay-cool handles assist with flipping the base and lid when emptying popcorn into the bowl, and the unit's removable heating plate cleans up effortlessly by hand or in the dishwasher. With its sleek, curvy design, the popcorn popper and nut roaster measures approximately 12 by 15 by 9-1/2 inches.

Buy NowGet 22% OFF

Click here for more information about West Bend 82386 Kettle Krazy Popcorn Popper and Nut Roaster

Read More...